1. Design considerations

2. Water demand & storage

3. Pipe sizing

4. Pipe materials

5. Pump systems

[Powerpoint file in PDF format]

• What is Water Hammer? | DFT Inc. (2:38) https://youtu.be/6ydsAIHWVNM

• Application for Water Supply in HK https://www.wsd.gov.hk/en/customer-services/application-for-water-supply/
  
• IOP, 2002. Plumbing Engineering Services Design Guide, [New ed.], Institute of Plumbing (IOP), Hornchurch, Essex, UK. [HKALL] http://docshare04.docshare.tips/files/24329/243291973.pdf
• Hot and cold water supplies, p. 1-23
  
• Pumps and pumping, p. 161-168

• Garrett, R. H., 2008. Hot and Cold Water Supply, 3rd ed., Chichester, West Sussex, U.K. [HKALL]
• Hall F. & Greeno R., 2017. Building Services Handbook, 9th ed., Chps. 2 & 3, Routledge, Oxon & New York. [HKALL]
• WSD, 2020. Technical Requirements for Plumbing Works in Buildings (November 2020 version), Water Supplies Department (WSD), Hong Kong. https://www.wsd.gov.hk/en/plumbing-engineering/requirements-for-plumbing-installation/technical-requirements-for-plumging-works-in-bldgs/
  
• WSD, 2018. Handbook on Plumbing Installation for Buildings, Water Supplies Department (WSD), Hong Kong. https://www.wsd.gov.hk/en/plumbing-engineering/requirements-for-plumbing-installation/handbook-on-plumbing-installation/

• Water Supply for New Buildings https://www.wsd.gov.hk/en/customer-services/application-for-water-supply/water-supply-for-new-buildings/
  
• Licensed Plumbers https://www.wsd.gov.hk/en/plumbing-engineering/licensed-plumbers/
  
• Cap. 123I Building (Standards of Sanitary Fitments, Plumbing, Drainage Works and Latrines) Regulations https://www.elegislation.gov.hk/hk/cap123I
  
• Water Hammer https://www.dft-valves.com/applications/water-hammer/
  
• Pipes and Fittings to be used in Inside Service or Fire Service https://www.wsd.gov.hk/en/plumbing-engineering/pipes-and-fittings-to-be-used-in-inside-service-or/
  
• Voluntary GA (General Acceptance) Labelling Scheme for plumbing products https://www.wsd.gov.hk/en/plumbing-engineering/pipes-and-fittings-to-be-used-in-inside-service-or/voluntary-ga-shop-scheme/
  
• Voluntary Quality Assurance Information Scheme (GA+) https://www.wsd.gov.hk/en/plumbing-engineering/pipes-and-fittings-to-be-used-in-inside-service-or/voluntary-quality-assurance-information-scheme-ga/