Chadderton, D. V., 2000. Building Services Engineering, 3rd ed.,
Chp. 6, E & FN Spon, London & New York. [696
C43]
CIBSE, 1999. Public Health Engineering, CIBSE Guide G, Chp. 2, Chartered
Institution of Building Services Engineers (CIBSE), London. [LB
628 P97]
Garrett, R. H., 2000. Hot and Cold Water Supply, 2nd ed., Blackwell
Science, Malden, MA. [696.1
G239 h]
Hall, F., 1994. Building Services and Equipment, 3rd ed., Vol. 1,
Chps. 1 & 2, Longman, London. [696
H17]
IOP, 2002. Plumbing Engineering Services Design Guide, [New ed.],
Institute of Plumbing, Hornchurch, Essex, UK. [PolyU: TH6124.P58
2002]
IOP, 1988. Plumbing Engineering Services Design Guide, 2nd ed.,
Institute of Plumbing, Hornchurch, Essex, UK. [LB
696.1 P73]
Moss, K. J., 1996. Heating and Water Services Design in Buildings,
E & FN Spon, London [697
M91]
Nathanson, J. A., 2003. Basic Environmental Technology: Water Supply,
Waste Management, and Pollution Control, 4th ed., Chps. 2, 3 &
7, Prentice Hall, Upper Saddle River, N.J. [628
N275 b]
WSD, 2002. Hong Kong Waterworks Standard Requirements for Plumbing Installation
in Buildings, Water Supplies Department (WSD), Hong Kong, February
2002.
WSD, 2001. Handbook on Plumbing Installation for Buildings (May 2001),
Water Supplies Department (WSD), Hong Kong.
WSD, 2000a. General Information on the Use of Different Types of Pipe
Materials as Inside Services in Buildings, Water Supplies Department
(WSD), Hong Kong, June 2000.
WSD, 2000b. Installation Notes of Different Types of Corrosion Resistant
Pipe Materials as In Inside Service in Buildings, Water Supplies Department
(WSD), Hong Kong, June 2000.